1-Testosterone Cypionate Buy Raw Dihydroboldenone DHB Powder

1-Testosterone Cypionate is a relatively new AAS product on the market, which is vastly increasing in popularity. However, since the demand of this product outweighs the supply, there is a lack of reputable reviews on this products performance, post injection pain (PIP) and suitability for AAS users who are looking to adapt their aesthetics in an uncommon/unconventional manner. So, in order to increase the knowledge available for this product (1-Testosterone Cypionate) I have created a review based upon my personal pinning experiences.

****************************************

Data of 1-Testosterone Cypionate Powder:

Names: Dihydroboldenone, 1-test cyp, 1 test, DHB, 1-Testosterone Cypionate.
Chemical Names: 17beta-hydroxyandrost-1-en-3-one, 5alpha-androst-1-en-3-one, 17beta-ol.
Active Life: depends on the ester utilized
Anabolic/Androgenic Ratio: 200/100.
Dosage: 300-400 mg/week to 1000 mg/week.
Melting point: 192~196 °C.
Appearance: white crystalline powder.

Prices of 1-Testosterone Cypionate Powder:
$550 ... 100 gams;
$3500 ... 1000 grams.

Recipe for Brewing 1 - Testosterone Cypionate Oil:

The recipe used was:
2% BA
10% BB
10% Guiacol
75% of total oil used GSO
25% of total oil used Eathyl Oleate.

About 1 - Testosterone Cypionate / Dihydroboldenone Powder

Naturally, many hard-core athletes have employed 1-testosterone as a parental (injectable) preparation. Those that were able to acquire 1-Testosterone esters such as decanoate or cypionate realized the best anabolic results due to improved pharma-kinetics. Most users of properly prepared sterile products (pyrogen free) report significant hardening of the musculature with increased lean mass tissue and fat loss at total weekly dosages of 200-300mg. There is also a surprising noted significant increase in functional strength. Many have compared 1-Testosterne Cypionate to Trenbolone in effects. I have noted this to be so but this would suggest potential for the negative side-effects of trenbolone as well. I would suggest that the results from this type of application are closer to that of high dose Primobolan Acetate use with better over all hardening value. (Harder, leaner, stronger and increased libido).

As for the duration with which dihydroboldenone can be run, due to the mild nature of the drug extended use of the compound can be completed with little in the way of serious complications arising. There are no major issues with hepatoxicity or severe kidney stress and the effect it has on other vital health markers such as blood pressure is slight in the majority of users.

As for specific dosages used with this drug, the low end is primarily thought to be three hundred to four hundred milligrams per week for male users. Like all drugs this number will vary from user to user and also depends on how much of a dramatic effect a user will want to achieve with the drug. As for the highest doses that would be worthwhile for users to attempt, this again depends on a number of variables. Doses of one gram per week are not uncommon for some users with others attempting doses in excess of this. It will always come back to how much one is willing to administer and at what point do the positives of increasing your doses begin to be outweighed by the negatives.

As previously indicated dihydroboldenone does not aromatize and therefore estrogenic side effects such as gynecomastia and water retention are not a concern for users. This is partly due to the drug being incapable of 5alpha reduction. Also, androgenic side effects would also be extremely infrequent for most users as there is little in the way, in terms of attributes of the drug, to produce these. These include such things as acne and hair loss, although it appears to have the potential to cause prostate enlargement. This potential for prostate growth is actually similar in frequency and severity as with that of testosterone propionate.
Other common negative side effects associated with the use of anabolic/androgenic steroids are still relatively mild with the use of dihydroboldenone. Of course suppression of the natural testosterone production of users will occur like with all steroids, however other side effects such as an increase in blood pressure, acne and others are comparably mild and often times non-existent in users, at least as they are directly related to the administration of this drug.
 

What’s the dosage of 1 test cyp / DHB weekly?

So what is an effective weekly dose? Many bodybuilders state that a lower does is 300-400mg/week while others say that 1000mg/week is not uncommon. However, like all anabolic steroids, this amount will vary from person to person for optimal effects. Plus, as with any steroid, there is always a point of diminishing returns. Meaning at what does do the negatives outweigh the positives. Regardless of the ester used however, the same rules apply for maintaining desired levels of 1-test in the blood when it comes to the frequency of injection.

Again, women bodybuilders use the normal rules when deciding to use a compound or not and dihydroboldenone is no exception. As with most compounds, women generally start with the shorter esters along with lower doses of the drug in an effort to identify as earlier as possible how their body will react to the compound. Obviously to minimize virilization effects. Many women athletes begin this compound at 25 to 50mg/week. Women should expect to experience much greater virilization effects at doses much higher than that.
 

Email: david@pharmade.com
Skype: lee.liangqing1
Whatsapp: +86-18038192037
Please don't hesitate to contact us if any questions.

Step By Step Instructions: How to Make Steroid Injectables?

Preface:

With the availability of multiple options of steroids in the market place, one is never out of options. However, they do cost a substantial amount. Besides, certain brands suit certain people better while they do not seem to suit everyone at the same time. 
Under such circumstances, an option to make steroids at home would be nice. You would know exactly what is being prepared and could rely on the home made version to be free of any unwanted dilemma. Because we are able to custom make the steroids as you required. 
This is a way of individuation and cost effectiveness.

Is it safe to make steroids at home?

It is like making any other product or cooking a delicacy. If you are following the proper steps to make it would be great in results too. If you do not follow the proper steps than even the best of food and delicacies taste bad. Same would hold true for steroids too. You need to ensure that the proper ingredients are in place and the proper steps are being followed.

If the ingredients and the preparatory steps are followed properly than homemade steroids are as good as or even better than some of the best readymade products available in the market. All you need to do is to understand the nuances and importance of the right combination of the ingredients and making them through proper steps.

How do you go about the steps?

According to the type of steroid and corresponding ingredients, the steps might vary slightly. Usually, one of the ingredients would be an equivalent of hormone powder while there would be some format of alcohol as another type of ingredient.

However, there is a basic framework that acts as a guideline for creating steroids at home. Let us assume that you have ingredient A, B and C to be mixed for creating a particular kind of steroid. Following would be the steps for doing the same:

1)    There is a certain amount or quantity of A, B and C that are to be mixed with a particular proportion in mind. You need to know the ratio. So if the ratio is 5:2:3, then for a 100 gr of the steroid you need to mix 50 gm of A, 20 gm of B and 30 gm of C. 

2)    There would be a corresponding amount of preferable liquid (in most cases some kind of oil) to be mixed with the other ingredients. Follow the prescribed quantity. So if 100 ml of oil is required for 1 kg of the total mix, use 10 ml of oil for 100 gm of the ingredient mix. 

3)    You need a clean and sterilized beaker or a container. Mix the ingredients A, B and C well and place them in the beaker or container. 

4)    Add the required liquid/ oil to the beaker/ container. 

5)    Put the beaker/ container on heat. Ensure that the level of heat is either low or moderate but never high. 

6)    Depending on the type of steroid and the method of consumption, you might need to bake the resultant produced or keep it in liquid format. 

While these are the general steps for making steroid at home, there can be variations depending on the type of ingredients in use and the type of resultant steroid. Additionally, the preferred method of consumption may also need modification of steps.

We offer potent and high purity of raw steroid powders in China. Be our customer, we will be able to offer step by step instructions for homebrew Please contact David if you have any interests.

Anabolic Steroid - Nandrolone Decanoate Deca Durabolin Powder

Deca durabolin powder is a very nice anabolic, causing nice (albeit slow) gains in quality muscle.
Studies shows that, Deca impoved collagen synthesis and Deca Durabolin increased bone mineral content.
Deca Durabolin (and Nandrolone in general) doesnt produce many estrogenic or androgenic side effects. This is because Deca Durabolin has a very low rate of aromatization (conversion to estrogen via the aromatase enzyme), roughly equal to 20% the rate of Testosterone.Deca Durabolin also has a very long active life. 

Data of Nandrolone Decanoate:
Alias: Deca, Nan Deca
CAS ID: 360-70-3
M.F.: C28H44O3
M.W.: 428.65
Purity: 99.13% by HPLC
Standard: USP32/BP2003
Melting point: 33.5~35°C
Appearance: white or oyster white to pale yellow crystalline powder.
Buy best nandrolone decanoate powder online.

Minimum order quantity: 10 grams.
Competitive offers will be provided according to your detailed orders.


Nandrolone Decanoate , also known as Deca Durabolin or Deca, is perhaps the second-best known injectable anabolic steroid after testosterone. It seems that almost every steroid novice and many who are experienced with steroid cycles believe that for best results they may need to include Deca.

Deca Durabolin / Nandrolone Decanoate Properties:

The unusual properties of Deca Durabolin are due to its parent steroid, nandrolone, also known as 19-nortestosterone. One of the principal positive qualities of nandrolone is that it has relatively low conversion to estrogen compared to testosterone.


In earlier years, testosterone and nandrolone were the only pharmaceutical injectables that were both widely available to bodybuilders and economical. Estrogen control did not then exist. For this reason, Deca’s low aromatizing properties were then quite useful. Deca therefore won wide popularity.

Recommendations of Deca Durabolin:

For these reasons we generally recommend against Deca Durabolin use except where the athlete already knows that he can experience joint relief from the compound, or he wishes to see if that will be the case for him and he understands the possible adverse side effects. I prefer for Deca use to be as low as is effective for any such joint problems, and for the majority of the total steroid dosage to be from other compounds.

The long half-life of the drug results in slow clearance. For this reason, Deca Durabolin is unsuited to short cycles or where drug testing is a possibility. I also consider the drug a poor choice for women due to being at least as virilizing per milligram as most other anabolic steroids except testosterone and taking too long to clear if side-effects occur.

Benefits Of Deca Durabolin

Originally developed to treat individuals diagnosed with muscle wasting diseases, Deca Durabolin has the potential to improve bone density and muscle growth. Use of this steroid for a period of six to eight weeks is associated with a dramatic increase in the production of red blood cells and curing joint problems experienced by some athletes during intense workouts. This steroid is generally used during mass gain or dieting phases and is one of the very few steroids that can be used in both the off-season and before a professional contest.

By the way, we offer professional steroid production instructions for your business.

Start your business with us today.

Buy Tren Enan Trenbolone Enanthate Powder Online

Trenbolone Enanthate truly shines in its ability to greatly preserve lean muscle tissue. It's a steroid used by veterinarians on livestock to increase muscle growth and appetite. Trenbolone compounds have a binding affinity for the androgen receptor five times as high as that of testosterone.
Minimum order quantity: 10 grams.

98.60% Trenbolone Enanthate Powder

Trenbolone Enanthate vs Trenbolone Acetate vs Trenbolone Hex
Trenbolone Enanthate is affixed with the Enanthate ester, a long ester that extends the half-life of Trenbolone upwards of 7 - 10 days. This is quite different from Trenbolone Acetate, which expresses a half-life of approximately 3 days. Ultimately, there are both advantages and disadvantages to both, which will be addressed shortly. Trenbolone Enanthate in terms of release rate and pharmacokinetics is literally identical to Testosterone Enanthate (or any anabolic steroid affixed with the Enanthate ester).
Trenbolone Enanthate use:

200 ML of Tren Enan 200 mg/ml Semi-finished

>> We offer professional help for the production of finished steroids.
>> We love hearing from you for any of questions or queries you may have.


Alias: Tren enan
Cas ID:2322-77-2
Purity: 98.6% by HPLC
Melting point: 69~71°C
Appearance: Pale yellow or yellow crystalline powder

Competitive offers will be provided according to your detailed orders.



Anabolic steroids such as Trenbolone Enanthate are designed to provide a fairly quick release of the hormone into the body in the initial 2 days or so after initial administration, and blood plasma levels remain high, slowly tapering off over a two week period. This could be considered a sustained release. Because the half-life of Trenbolone Enanthate is quite close to Parabolan (Trenbolone Hex), the two are easily interchangeable with one another.

It should be made perfectly clear, however, that the esters affixed to the hormone (Acetate, Enanthate, or Hex) merely serve to alter the release rate and half-life of the drug - they do not alter the strength, potency, or pharmacodynamics of the hormone that the ester is affixed to. Trenbolone Acetate expresses a 3 day half-life, Trenbolone Enanthate expresses a 7 - 10 day half-life, and Trenbolone Hexahydrobenzylcarbonate (Parabolan) expresses a 14 day half-life.

Trenbolone Enanthate exhibits a half-life of approximately 7 - 10 days and is presently more common than its other long-ester counterpart Parabolan, it provides many users who are mostly needle-shy or find frequent injections inconvenient with a more convenient form of Trenbolone to use. In contrast with Trenbolone Acetate, which requires every other day injections at the very least, Trenbolone Enanthate requires administration only twice per week with each injection spread evenly apart (Monday and Thursday, for example). Because Trenbolone is considered an intermediate-advanced level anabolic steroid, the majority of users of this compound are usually well aware of the ins and outs of it.  

Many intermediates making their first step to Trenbolone will prefer Trenbolone Enanthate due to the convenience of less frequent injections. However, the disadvantage to this is the fact that Trenbolone is an anabolic steroid that is extremely powerful and does carry with it some potential side effects unseen with any other compounds. It has therefore been labelled as a ‘harsh’ anabolic steroid, and beginners to Trenbolone who are wondering which form to use might want to opt for Trenbolone Acetate instead. 

The reason being that the faster half-life of Trenbolone Acetate ensures that blood levels of Trenbolone rise quickly and fall quickly as well, ensuring a fast clearance from the body should any issues arise and the user wishes to stop. With Trenbolone Enanthate, two weeks is what is required before Trenbolone is completely clear of the body, during which time undesirable side-effects might persist.

It is therefore the prerogative of the individual to use this information and decide for themselves whether the convenience of less frequent injections is indeed worth the risk of having to wait two weeks before the drug is clear from the body if any undesirable effects arise. If the user is a well-experienced user of Trenbolone that already understands their body’s reaction, this decision should already be made.

It is important to understand that with long-estered anabolic steroids like Trenbolone Enanthate, the time required for the hormone to reach peak and optimal circulating blood plasma levels is considerably longer than short-estered variants. For example, many individuals report experiencing significant strength gains and/or physique changes by the second or third week with Trenbolone Acetate, but Trenbolone Enanthate might require upwards of 4 - 6 weeks (depending on the individual as well) before the hormone noticeably “kicks in”. Because of the long Enanthate ester, the hormone slowly reaches optimal levels over a period of a few weeks as each dose builds upon the last. Of course, those who wish to speed up this process can always decide to frontload. However, be aware that there are both benefits as well as risks/downsides to such a practice, and frontloading should thoroughly be researched and contemplated before doing so. This is especially true with a compound such as Trenbolone, and is doubly especially true if the user is a first-time Trenbolone user.

Testosterone Cypionate Powder

Testosterone Cypionate is a synthetic version of the naturally produced testosterone hormone.
Testosterone Cypionate is responsible for many different physical and mental characteristics in males.

Testosterone Cypionate Powder

Alias: Testosterone Cyclopentylpropionate;test cyp;Test Cypionate;

M.F.: C27H40O3

M.W.: 412.6

CAS ID: 58-20-8 

Purity: 99.2% by HPLC.

Melting point: 101-102°C.

Appearance: White powder. 

Minimum order quantity: 10 grams.

Competitive offers will be provided according to your detailed orders.

99.20% of Testosterone Cypionate Powder

GENERAL INFORMATION TESTOSTERONE CYPIONATE:

Testosterone cypionate is very similar to tesosterone enanthate. Although half lives and active life periods are different, they are similar. Injections are normally less frequent for cypionate. Testosterone is the king of all mass builders and for this purpose is also fairly cost effective. It works well either alone or stacked to create a great bulking cycle. It has a high risk of side effects due to its conversion to DHT and has the potential to form estrogen, causing gynecomastia. These characteristics also cause it to have such excellent mass building tendencies. Due to some other side effects, such as water retention, it may not be the best used alone for lean mass gains, but with bulking comes the addition of a lot of muscle as well as some gains in fat and water weight. This is typical and a natural part of the enhanced bodybuilder's bulking regiment.

Doses Of Testosterone Cypionate:

Doses of 200-100mg a week are common using testosterone cypionate, with excellent results found midway at about 500 mg or less for the first time user and between 500-1000mg weekly for the more advanced athlete. Testosterone stacks well with anything and is also great when used alone. When stacked with another anabolic-androgenic steroid, distinct androgenic effects may be seen. Using cypionate will improve regenerative capacity as well as training aggressiveness which results in significant increases in overall strength during the course of the cycle.

About Side Effects of Testosterone Cypionate:

Testosterone cypionate is a good choice for the first time steroid user. A simple cycle consisting of 500 mg of cypionate weekly for 10 weeks, with ancillaries on hand, and standard post cycle therapy makes a good first cycle and can create some excellent gains in muscle mass. Along with those gains will come some gains in fat as well as water rentention, but that is a standard part of bulking up and should be expected. Enanthate or cypionate are also normally preferred over sustanon for a first cycle, due to the inability to maintain stable blood levels of sustanon while at the same time minimizing injection frequency. For maximum efficiency, every day or every other day injections of sustanon are normally administered. This is unnecessary while using cypionate due to its extreme length of action. 

A long acting testosterone ester will be very helpful for your bulking needs, and cypionate is a product which is more simple than some of the other steroids out there. Not to say it is without its share of complications, but it's a good choice, especially for those new to enhanced bodybuilding. Discontinuing the product is not an option in case side effects occur, because it will continue to aggravate these side effects over extended periods of time due to the long length of action of this steroid. Ancillary drugs such as nolvadex, proviron, clomid and HCG may help, both during cycle and post cycle to help restore natural testosterone production. Testosterone cypionate does aromatize slightly more than sustanon, but when using either drug, one should be familiar with anti-estrogens such as nolvadex or clomid and use one of them when symptoms of gyno occur. 

gynecomastia

INJECTION INFORMATION OF TESTOSTERONE CYPIONATE:

Weekly totals of 250-1000mg weekly are frequently used, and sometimes more for the highly advanced athlete. Due to the relatively long half life of cypionate, injections are usually administered once per week. This will allow stable blood levels to be maintained. When the level of steroid tapers down, a new injection is made, keeping everything fairly level. This is unlike sustanon, which requires more frequent injections for the same effect. For a first cycle, 500mg alone of testosterone cypionate, shot once weekly (Monday and Thursday for example), for 10 weeks along with standard post cycle therapy would be very sufficient for good gains.

>> We offer professional help for the production of finished steroids.
>> We love hearing from you for any of questions or queries you may have.

Testosterone Propionate (Testoviron ) Powder

Testosterone Propionate is the shortest commonly ester attached to the testosterone hormone, so it takes your body the least amount of time to rid itself of the ester and release the parent hormone into the body. Anything will stack well with testosterone propionate.

Alias:Test Prop, Sterandryl, Agovirin, Testosteron, Testoviron.
CAS ID: 57-85-2
M.F.: C22H32O3
M.W.: 344.49
Purity: 98.85% by HPLC.
Melting point: 119-121°C.
Appreance: White or creamy-white crystalline powder.

Minimum order quantity: 10 grams.
Competitive offers will be provided according to your detailed orders.

98.85% Testosterone Propionate Powder

Testosterone propionate vs Testosterone enanthate vs Testosterone  cypionate and Sustanon:

Testosterone propionate is similar to enanthate, cypionate, and sustanon. However, compared to enanthate or cypionate, propionate is a much shorter ester and will release more quickly into the bloodstream. As a result of its short action, more frequent (daily) injections are required to prevent steroid blood levels from tapering down and becoming ineffective. An injection schedule of every third day is about the longest you would want to perform using propionate to achieve good results. For best results - daily injections are more suitable given the nature of this agent.
Peak propionate levels take place after 24-36 hours and taper down from there. As a result of the frequency of injections required of propionate, it is not a very attractive steroid for those who are doing their first cycle or those who do not like intra-muscular injections to begin with.
For a first cycle, a longer acting, single ester testosterone such as enanthate or cypionate or preferred because in both cases few injections can be made while maintaining stable blood levels and thereby optimizing results. Respectively, enanthate should be injected twice weekly and cypionate once weekly. Since both yield similar results, the first time user would more likely enjoy either of those two compounds over propionate.

The benefits of propionate may not be worth the additional energy required for the injections. Propionate is also a relatively painful steroid to inject with uses complaining that the same spots become aggravated with additional injections which require injecting in several different places for prevention of this pain.
The injection site may become irritated and users have complained of long lasting pain caused by the injections. For these reasons, propionate is not such a good idea for the first time steroid user, however, enanthate and cypionate are not without their share of complications and all factors should be assessed before beginning with any steroid cycle.
If propionate is the steroid of choice, ancillary drugs such as nolvadex, proviron and arimidex are advised to have on hand during the cycle in case symptoms of gyno arise (or if you wish, you can run these drugs during the cycle for prevention). All testosterones will aromatize, although some have a lesser chance of it. Propionate may be one of those drugs, but proper precautions should be taken, nevertheless.

Testosterone Propionate (Testoviron) Effects:

As a testosterone such benefits will include but are not limited to:

Increased Strength:

Increased Muscle Mass

Reduced Body-Fat

Increased Recovery

Increased Levels of IGF-1

Increased Sex Drive

A Greater Sense of Well-Being

Increased Energy

Greater Athletic Performance

Semi-finished Sustanon 250 mg/ml Conversions

>> We offer professional help for the production of finished steroids.
>> We love hearing from you for any of questions or queries you may have.

Boldenone Undecylenate Equipoise Liquid Raw Steroid

          Raw Boldenone Undecylenate / Equipoise Liquid
          Alias: BU, EQ
          CAS No.: 13103-34-9
          Assay: 98.01% by HPLC
          Appearance: Yellowish oily liquid.
          MFG. Date: 2015.02.05

          Minimum order: 10 grams.
          Competitive offers will be provided according to your detailed orders.

          Also we can brew equipoise with grapeseed oil, recipes for reference:
          1) 500ml Equipoise @250mg/ml recipe:
          Boldenone Undecylenate liquid 125 grams(1g=0.75ml)
          Grapeseed oil: 346.25ml
          Benzyl Alcohol: 10ml (2%)
          Benzyl Benzoate: 50ml (10%)
     

500ml Semi-finished Boldenone Undecylenate 300mg/ml

          2) 50ml Equipoise @200mg/ml recipe:
          Boldenone Undecylenate for 10 grams,
          1.5ml BA (3% BA),
          41 ml Grapeseed oil.

          If you are interested in raw equipoise or its semi-finished oil solutions, please don’t hesitate to email me. Thanks.

Stanozolol Winstrol Raw Powder - Anabolic Steroid Powder

Winstrol's the effects, we find it readily suits two well-intended purposes; enhancing overall athletic performance and as a cutting agent for the dieting bodybuilder or gym rat. In either case the effects of Winstrol can be highly valuable to both purposes and as such we find an anabolic steroid in Winstrol that has a welcomed home in performance enhancement. 

Stanozolol Winstrol Powder
CAS ID: 10148-03-8
M.F.: C21H32N2O
M.W.: 328.49
Purity: 99.20% by HPLC
Standard: USP28/BP2003
Melting point: 242 °C
Appearance: White Solid.

Minimum order quantity: 10 grams.
Competitive offers will be provided according to your detailed orders.

99.20% Stanozolol (Winstrol) Powder

Stanozolol (winstrol), enhances overall athletic performance and also be used as a cutting agent for the dieting bodybuilder or gym rat if the user isn't too sloppy with their diet.

We are not able to produce any winstrol tablets, but we can brew 50 mg/ml winstrol water-based suspension for you. 
Recipe for 20 ml Winstrol @50 mg/ml water-based suspension:
Stanozolol powder 1 g powder
BB 24% – 4.8 ml
BA 3% – 0.6 ml
PS 80 3% – 0.6 ml
Distilled water 12.5 ml
mix powder, BB, BA, and PS 80 and heat until dissolved. filter, add water and re-filter.

Besides, winstrol can be brewed with oil-based.

Winstrol Oil based 50 mg/mL 100 mL recipe:
Stanozolol powder – 5 grams
2% BA – 2mL
20% BB – 20mL
15% guaiacol – 15mL
15% EO – 15mL
GSO 50% – 45mL

Benefits of Winstrol / Stanozolol:

Most typically, winstrol will bring for strength or speed with mass increase is unimportant or actually undesirable. Another situation winstrol / Stanozolol is for physique enhancement if a “hardening” effect is desired, the users do not wish to use trenbolone.
Winstrol is a suitable choice for simpler purposes as well. For example, though not ordinarily used for mass gain it can provide significant mass advantages to a 500 mg/week body-recomp testosterone cycle, while not increasing estrogen or requiring use of an aromatase inhibitor. It will also increase fat loss effect compared to a steroid cycle using that amount of testosterone alone.

Stanozolol Winstrol 50 mg/ml Water Suspension

>> We offer professional help for stanozolol pill pressing or capsule filling.>> We offer professional help for the production of finished stanozolol solutions.>> We love hearing from you for any of questions or queries you may have.

Dianabol Dbol Methandienone Raw Powder

All injectables stack well with dbol, with partial exception that at higher doses of testosterone Dbol becomes less useful and eventually entirely unnecessary. The effect of most injectable anabolic steroids is greatly enhanced by addition of Dianabol. The improvement is greater than from simply increasing the amount of injectable by the same amount. But can be of value used alone as well.   
 
Methandienone Powder
Alias: Dianabol, Dbol, D-bol, Methandrostenolone
CAS No: 72-63-9
Purity: 98.13% by HPLC.
Melting Point: 165°C
Half-life(tablet): About 3 to 5 hours.
Appearance: White Or Almost White Crystalline Powder
Manufacture Date: 2015.08.05

Methandrostenolone Raw Powder

The effects of most injectable anabolic steroids is greatly enhanced by addition of Dianabol. The improvement is greater than from simply increasing the amount of injectable by the same amount.

All injectables stack well with dbol, with partial exception that at higher doses of testosterone, Dbol becomes less useful and eventually entirely unnecessary.

Be our customer, we will be able to offer professional instructions for how to make dianabol pills (tablets).

Cut Stack Depot 400mg/1ml Blend Injectables

            Cut Stack Depot 400mg, each 1ml contains:
            Testosterone Decanoate 150mg
            Trenbolone Enanthate 125mg
            Masteron Enanthate 125mg
            Minimum order quantity: 100ml

Filtered Cut Stack Depot 400mg/ml from one of my customers

            Testosterone is responsible for promoting health and well-being through 
            enhanced libido, energy, immunity, increased fat loss, gaining and maintaining 
            lean muscle mass, preventing Osteoporosis (loss of bone density) and possible 
            protection against heart disease.

            Trenbolone increases both protein synthesis as well as nitrogen retention in
            muscle tissue. Trenbolone can also bind with the (anti-anabolic) glucocorticoid
            receptor, thus aiding the muscle building process. Finally, it also has the ability
            to improve nutrient efficiency and mineral absorption in animals given the drug.

            Masteron is a powerful anabolic/androgenic steroid derived from DHT that was
            designed to fight certain forms of breast cancer. It is used by bodybuilders as a
            bulking and cutting agent, as well as an ancillary drug to combat estrogenic side
            effects like water-retention. Its toxicity to the liver is very low, although side
            effects such as acne, hair loss and prostrate enlargement are common.

Ripex 225mg Per 1ml Pre-made Multi Dose Injection

Ripex 225 is a formidable combination of 75 mg Test Prop, 75 mg Trenbolone Acetate, 75 mg Drostanolone Propionate. A potent anabolic agent with high androgenic properties, Ripex 225 provides the essential ingredients for high levels of muscle mass, fat loss and quality competitive conditioning.

Ripex 225, each 1 mL contains:

Testosterone Propionate         75 mg

Trenbolone Acetate                75 mg

Drostanolone Propionate        75 mg

Benzyl Alcohol
Benzyl Benzoate 

Grape Seed Oil / Ethyl Oleate      q.s.

Minimum order quantity:100 ml
Competitive offers will be provided according to the detailed orders.

Filtered Ripex 225 from One of My Customers

Kindly Notice:
Avoid direct sunlight
Avoid freezing
Stored at 8-30Dec.
Administer under medical direction.

A formidable combination of 75 mg Test Prop, 75 mg Trenbolone Acetate, 75 mg Drostanolone Propionate. A potent anabolic agent with high androgenic properties, Ripex 225 provides the essential ingredients for high levels of muscle mass, fat loss and quality competitive conditioning.

Trenbolone Acetate,

is at least 3 times more anabolic and androgenic than Testosterone or Nandrolone. Trenbolone binds to androgen receptors (ARs) with approximately three times the affinity of testosterone and has been shown to augment skeletal muscle mass and bone growth and reduce adiposity.

Testosterone Propionate,

is a powerful mass building drug that is able to rapidly add gains in muscle size and strength. It’s the only aromatizing steroid in this stack but at reasonable doses aromatization is moderate. I'm convinced there's almost no other traditional injectable stack that's as potent and versatile as Testosterone and Trenbolone.

Masteron (drostanolone propionate),

is a moderately anabolic steroid that promotes increases in hardness, lean body mass and strength which has a positive effect on the potential for fat loss. Masteron does not possess any estrogenic activity and therefore water retention is highly unlikely. 

Common recipe of 200 ml of Ripex 225 for homebrew:

Powders: 
Masteron Prop: 7.5 grams
Test Prop: 7.5 grams
Tren Ace: 7.5 grams
B.A. 2%,
B.B. 20%,
G.S.O. / E.O.     q.s.

>> We offer professional help for the production of finished steroids.>> We love hearing from you for any of questions or queries you may have.

Semi-finished Testosterone Propionate 100mg/ml Oil Solutions

Semi-finished Testosterone Propionate injectable conversion recipes

(Notes: BB=benzyl benzoate;     BA=benzyl alcohol;    EO=ethyl oleate;                
Oil/GSO=grapeseed oil)

Common 100mg/mL Recipe for 100mL
10 gram Testosterone Propionate powder (7.5mL)
2mL BA (2%)
20mL BB (20%)
70.5mL Oil

Unfiltered 500ml testosterone propionate 100mg/ml oil solution

Common 200mg/mL Recipe for 100mL
20 gram Testosterone Propionate powder (15mL)
2mL BA (2%)
20mL BB (20%)
50.4mL EO
12.6mL Oil

Testosterone Propionate is considered a fast acting testosterone due to
effects beginning in about 1 day. The drug reportedly has all the benefits of
other testosterones (quick strength and muscle mass increases, increased
training aggressiveness, fast post-training recovery) but caused a distinctly
lower level of water retention. Users noted an improved muscle pump and
increased appetite after one to two days of administration.

If this is in your favor, please feel free to contact David.

Gamma Butyrolactone (GBL) or GHB USP 99.5% Purity

Gamma Butyrolactone GBL

Synonyms: 1, 4- Butyrolactone, r -Butyroladone, BLO, Alloy cleaner, Rust remover
CAS ID: 96-48-0
Assay: 99.80% by HPLC
Appearance: Transparent colorless liquid.

Minimum order quantity: 1 liter.
Competitive offers will be provided according to your detailed orders.

       

Gamma Butyrolactone, GBL

GBL Applications:

1) Used to produce a-pyrrolidone, 1-Methyl-2-pyrrolidinone, polyvinyl pyrrolidone,
and a -Acetyl-r -butyrolactone;
2) used as anaesthetic and tranquilizer, used to produce ciprofloxacin and
interferon, as the intermediate of vitamin and rolicyprine;
3) As antioxidant, plasticizer, extractant, adsorbent, dispersant, fixative and curing agent;
4) Used in battery, capacitor and development of color film.

Details of GBL:

Assay 99.8% minimum
Water, maximum 0.02%
Appearance, Transparent liquid
Color (Hazen), 5
Refractivity, 1.4367
Glycol (wt%,GC), 0.003 max
Tetrahydrofuran (wt%,GC), 0.024

Lab research:

Gamma-Butyrolactone + NaOH => Sodium Gamma-Hydroxy Butyrate (Na-GHB)

The reaction proceeds equimolarly (the same number of each molecule reacts),and there are no byproducts produced in this reaction, such as hydrogen gas,water, or anything else as proposed in several other texts. All published preparations of GHB, or more correctly Na-GHB, refluxes butyrolactone with sodium hydroxide in various solvents, usually in aqueous alcohol, but this is not necessary.


Despite serious safety concerns and illegality, people take gamma butyrolactone for improving athletic performance, sleep, and sexual performance and pleasure. They also take it for relieving depression and stress, prolonging life, promoting clear thinking, causing relaxation, and releasing growth hormone. GBL is also used to trim fat and as a body- or muscle-builder. Some people take it as a recreational drug.

We have big stock of GBL available.

>> We offer professional help for the production of finished steroids.
>> We love hearing from you for any of questions or queries you may have.

Sustanon 250 Testosterone Blend Steroid Raw Powder

          Sustanon 250, or testosterone blend powder,
          it is testosterone base plus 4 different esters:
          Propionate, Phenylpropionate, Isocaproate, Decanoate.
          Appearance: white crystalline powder.

          How to brew injectables by your own:
       

Sustanon 250 raw powder

          100ml Sustanon @ 250mg/ml recipe
          10g test dec powder
          6g test iso powder
          6g test phenyl powder
          3g test p powder
          32ml EO
          31.25ml oil
          3ml BA (3%)
          15ml BB (15%)

Sustanon 250mg/ml from one of my customers

          Effective dose (Men): 500-2000mg/ week
          Active life: Up to 3 weeks
          Detection Time: 3+ months
          Anabolic/Androgenic ratio: 100/100

          Many performance enhancing athletes buy Sustanon, based on the same
          principles as the HRT patient in order to achieve a steady release of
          testosterone for a long period of time; although normally at a much higher dose.
          In order to maintain peaked and stable blood levels, this compound must be
          injected frequently, should be injected at minimum once every three days, with
          most finding every other day to be the best approach.

          Skype:lee.liangqing1
          Email: david@pharmade.com
          Please contact David if you have any interests.

Would you be interested in Homebrewing Steroids?

          We are legit manufacturer of steroid raw powders in China, and offering high
          purity steroid powders with great after-sale service and instructions.

HPLC Equipment

          Professionally discrete packages will be applied to pack the powders. And best
          shipping methods will be chose to post your parcel.
          Normally, after payment collected, your parcel will be packed and be sent out 
          within 48h on workday. And it takes about 5-9 days to most of the countries in 
          the world.

          Steroid Raw Powders, such as, Testosterone Enanthate, Testosterone
          Cypionate, Sustanon 250, Anavar, Winstrol, Dianabol, Trenbolone acetate,
          Trenbolone enanthate, Primobolan, Equipose, Masteron, and so on, they are the
          best-sellers.

          Besides, we can brew our steroid powders into oil-based or water-based
          injectables for you. Or maybe you are experienced at brewing by your own, any
          of your reviews from your side will be highly appreciated. Thanks in advance.

          Please feel free to contact Michael if this is in your favor.

Nolvadex vs Clomid For PCT?

Clomid vs Nolvadex

          When it comes to using Nolvadex for increasing endogenous testosterone release, 
          bodybuilders just do not want to hear it. Most people use Nolvadex to combat 
          gynecomastia over Clomid anyway.They only seem to want Clomid. 

          I can only guess that this is based on a long rooted misunderstanding of the 
          actions of the two drugs. In this article I would therefore like to discuss these two 
          agents for the specific purpose of increasing testosterone production.

          I am not sure should Clomid and Nolvadex become so separated in the minds of 
          bodybuilders.

          Some says, they will choose Clomid, others do Nolva, even more some do PCT 
          with them both.

          They are structurally related and specifically classified as selective estrogen 
          receptor modulators (SERMs) with mixed agonistic and antagonistic properties. 

          This means that in certain tissues they can block the effects of estrogen, by 
          altering the binding capacity of the receptor, while in others they can act as actual 
          estrogens, activating the receptor.